5-20
l M a i n t e n a n c e
Cleaning the Aftercooler/
Intercooler Coils
(continued)
5
Clean the assembly using a mild soap and water.
Let the assembly
dry thoroughly before installation.
NOTE:
In cases of heavy volatiles, steam cleaning or the use of solvents, such
as acetone, may be necessary. Be sure to test a small area with the solvent
you have selected to be sure there is no adverse reaction.
6
Inspect the condition of the gasket.
If it is damaged, replace the
gasket.
7
Reassemble
by repeating the steps in reverse order.
8
Connect the water supply line to the inlet.
If a manual shut off
valve is used, it should be mounted on the inlet line as well.
9
Connect the outlet of the aftercooler/intercooler to the inlet of the
flow control valve
using the pre-shaped copper tubing and compres-
sion fittings provided.
✐
Replacement gaskets are
available from Conair.
Contact Conair Parts
(800) 458 1960
From outside of the
United States, call:
(814) 437 6861
Summary of Contents for HTC 120
