![background image](http://html.mh-extra.com/html/conair/htc-120/htc-120_user-manual_2649067200.webp)
4-58
l O p e r a t i o n
Starting the Energ ySmart Dr yer
System
Without OptiMizer
TM
Mode
To start the EnergySmart Dryer System:
1
Turn on the main power to the EnergySmart Dryer and system compo-
nents.
Check to ensure that the all disconnect dials are in the "On" or “
I
”
position.
2
Fill the drying hopper with material
by navigating the System Overview
Screen (Screen 2) and pressing the optional receiver's magnifying glass icon.
Once at the Primary Loader Screen (Screen 5), set the receiver’s load time,
dump time and purge times and press the “Enable” button to start loading the
CH Hopper.
2b
If not using the loading function, fill the CH Hopper with material.
3
Navigate to the Dehumidifying Dryer Screen (Screen 4) within the dryer’s
control.
4
Set the dehumidifying drying circuit air flow to "Manual" mode.
5
Set the air flow setpoint to 100%.
ON
O
O
F
F
(continued)
NOTE:
Always verify process set-
point against recipe setpoint so that
material or equipment is not dam-
aged.
✐
NOTE:
User must be logged in as
“Operator” to change these set-
tings.
✐
100 %
100 %
Summary of Contents for HTC 120
