Conair HTC 120, User Manual

Page: 184 / 330

4-42 l O p e r a t i o n
Control Function Descriptions
(continued)
Screen 27 -Instrument Setup 2 Screen
To access the Instrument Setup 2 Screen (Screen 27):
1
Press the "Instrument 2” button
located on the Equipment Setup Screen
(Screen 20).
The Instrument Setup 2 screen provides the user with a summary of the EnergySmart
Dryer instrument Set points and data for:
• Process Air Dew Point
• Return Air Dew Point
• Dry Air Pressure (PT2)
• Dry Air Flow (FT2)
Where applicable, the settings and data contained on this screen include:
• Raw Input (mA)
• Engineering Minimum
• Engineering Maximum
• Offset
• Scaled Output
• Units
If the user is logged-in at the proper security level, all setpoints contained on this
screen can be changed using the pop-up keypad window.
NOTE:
Set points boxes are white
with heavy black borders. Set
points can be changed, if the user
has logged in at the proper security
level, by pressing the setpoint
boxes. This will launch a pop-up
keypad window that can be used to
change the setpoint.
See Operation
section entitled, Example Set Point
Change.
After the new setpoint
value has been entered, press the
"Enter"
key to lock in the new set-
point.
✐
(continued)
-76
-76