![background image](http://html.mh-extra.com/html/conair/htc-120/htc-120_user-manual_2649067091.webp)
3
In
st
al
la
tio
n
Connecting the Conveying Lines to
the Vacuum Pump(s) and Dust
Collector(s)
(optional)
1
Connect the vacuum line from the optional receiver to the air inlet of the
optional dust collector.
2
Connect the vacuum line from the dust collector’s air outlet to the vacuum
pump’s air inlet.
3
Repeat Steps 1 and 2 if a second optional receiver, dust collector and vacu-
um pump are to be used.
Make sure all hoses are securely clamped to
prevent wasteful leaking. The hoses should be
routed neatly and supported where possible to
prevent undue stress. Also, the bends should
be made with gradual radiuses. Sharp turns
will cause undue pressure drops.
Air Inlet
Air Outlet
Collection Chamber
Floor Stand
To Material Supply
NOTE
: Vacuum pump shown above is 180º out of position.
✐
NOTE:
Do not allow
the flexible hoses to
kink or crimp.
✐
I n s t a l l a t i o n - M a i n Po w e r C o n n e c t i o n s l
3-61
Summary of Contents for HTC 120
