![background image](http://html.mh-extra.com/html/conair/htc-120/htc-120_user-manual_2649067129.webp)
3
In
st
al
la
tio
n
I n s t a l l a t i o n - Te s t i n g l
3-99
Testing the Variable Frequency
Drive (VFD)
1
Press the “Local/Remote” button
to switch the blower VFD on the back of
the EnergySmart Dryer from the default of “Remote” to “Local”.
2
Using the “Start” and “Stop” buttons on the VFD, ‘Jog’ the motor to
check for proper wheel rotation.
The motor should be started in accor-
dance with the manufacturer's recommendations. Arrows on the process
blower indicate the proper direction of rotation and air flow.
3
Press the “Start” button to bring the process blower up to speed.
Watch
for anything unusual such as vibration, overheating of bearings and motor,
etc.
4
Check the blower’s motor amperage against the nameplate amperage
to
ensure that the motor is not overloading. The amperage is shown on the
display screen.
5
Press the “Stop” button,
once the blower has been tested and is operating
properly,
6
Switch the blower VFD from “Local” back to the default of “Remote”.
Stop and
Start Buttons
Local/Remote
Button
Display
Screen
TIP:
The display screen shows
the rotation direction. Rotation
arrow should always be point-
ing foward (clockwise).
✒
Summary of Contents for HTC 120
