Conair HTC 120, User Manual, Page: 49 / 330

Installing the Cyclone
(optional) (continued)
9
Bolt the third piece of 90 degree tubing to the assembly in Step 8 using the
supplied hardware.
The third piece of 90 degree tubing should be bolted to
the end of the assembly in Step 8 that DOES NOT have the dew point return
port. Be sure to place the supplied gasket between the two (2) pieces of tubing
before tighten the tube bolts.
10
Loosely bolt the now finished tubing assembly to the CH Hopper’s return
air outlet and to the cyclone’s air inlet, using the supplied hardware.
Be
sure to place the supplied gaskets between the tubing assembly and the CH
Hopper outlet and cyclone air inlet before tightening bolts. Mounting location
is dependent upon the installation location of the cyclone.
I n s t a l l a t i o n - G e n e r a l l
3-19
3
In
st
al
la
tio
n
Dew Point
Return Port
Gasket
Gasket
(continued)