Conair HTC 120, User Manual, Page: 71 / 330

Connecting the Cyclone Separator
(optional)
1
Using uninsulated hard piping or flexible hose, connect the cyclone outlet
to the optional dust collector inlet or dryer return air inlet.
If a flexible
hose is used, make sure it is securely clamped.
Make sure all hoses are securely clamped to
prevent wasteful leaking. The hoses should be
routed neatly and supported where possible to
prevent undue stress on the heater and hopper
assemblies. Also, the bends should be made
with gradual radiuses. Sharp turns will cause
undue pressure drops.
Outlet to
Dust
Collector
Inlet from
Cyclone
NOTE:
Do not allow
the flexible hoses to
kink or crimp.
✐
3
In
st
al
la
tio
n
I n s t a l l a t i o n - P i p i n g / H o s e s l
3-41
An optional hard piping kit for
your EnergySmart Dryer system
is available from Conair.
Contact Conair Parts
(800) 458 1960
From outside of the
United States, call:
(814) 437 6861