INSTALLATION INSTRUCTIONS
Side Draft Hand Dryer
FAN5655
All installations and electrical must comply with local and national electric codes as applicable.
Electrical work should only be carried out by a registered electrician
Ensure that the unit is installed on a suitably rated fused circuit with the supply isolating switch
having a minimum contact separation of at least 3mm. This device should be plugged into outlet
controlled by an earth leakage circuit breaker.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similar
qualified persons in order to avoid a hazard.
Do not insert objects into the air outlets. Doing so may be hazardous and could result in electrical
shock.
Do not obstruct the air inlets or outlets in any way.
Service hand dryer at regular intervals.
Do not use appliance within close proximity to water basins, tubs, showers or other vessels
containing water.
Young children should be supervised to ensure that they do not hang or play with this appliance.
The appliance is not to be used by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience or knowledge, unless they have been given supervision
or instruction.
Thank you for purchasing this SIMX Side Draft Stainless Hand Dryer. Please read this manual
thoroughly before installation and retain for future reference .
TECHNICAL SPECIFICATIONS
Power Source
220-240V AC
Total Input
1650W
Air Speed
342 km/hr
Sound Level @ 1m
36 dB(A)
Drying Time
10 - 15 seconds
Auto Shut Off
30 seconds
IP Rating
IPX4
Safety Class
I
Dimensions
300 (H) x 222 (W) x 730 mm (D
Material
1.2mm stainless steel 304
IMPORTANT
Summary of Contents for FAN5655
Page 3: ...Fig 5 Fig 4 Fig 3 ...
