background image

1

 

  

P/N  134306200A (0312)

Save These Instructions

Before beginning installation, carefully read these instructions. This will simplify the installation and ensure
the dryer is installed correctly and safely. Leave these instructions near the Dryer after installation for future
reference.

NOTE: The electrical service to the Dryer must conform with local codes and ordinances and the latest edition of the
National Electrical Code, ANSI/NFPA 70.

NOTE: The gas service to the Dryer must conform with local codes and ordinances and the latest edition of the
National Fuel Gas Code ANSI Z223.1.

NOTE: The Dryer is designed under ANSI Z 21.5.1  or ANSI/UL 2158 - CAN/CSA C22.2 (latest editions) for HOME
USE only
. This Dryer is not recommended for commercial applications such as restaurants or beauty salons, etc.

Pre-Installation Requirements................................ 2

Electrical Requirements........................................ 2

Ventilation System Requirements.....................................   3-4

Exhaust System Requirements.............................................   4

Gas Supply Requirements.....................................................   4

Location of Your Dryer..........................................................   5

Mobile Home Installation.....................................................   6

Rough-In Dimensions........................................................   6-7

Unpacking........................................................... 7

Reversing Door Swing........................................... 7

Electrical Installation............................................. 8

Grounding Requirements....................................... 8

Electrical Connections—3-wire.............................. 9

Electrical Connections—4-wire.............................. 9

Gas Connection................................................... 10

General Installation.............................................. 10

Replacement Parts.............................................. 10

Installation

Instructions

Gas &

Electric

Dryer

Frigidaire

www.frigidaire.com

Electronic

Summary of Contents for FEQBB30DS0











Reviews: