4-13
Cisco Catalyst Switch Manager User Guide
OL-4930-01
Chapter 4 Deploying the Cisco Catalyst Switch Manager
Manually Deploying Network Objects
–
wsc6509NEB
–
wsc6513
Step 3
Click Forward.
The Deployment Wizard—Summary window closes and the deployed Network Element object(s) appear
in the left-hand pane of the Map Viewer beneath the generic object from which deployment was initiated
and the corresponding icon(s) appear in the right-hand pane of the Map Viewer. The Software and
Chassis objects appear beneath the Network Element object in the left-hand pane of the Map Viewer and
the corresponding icon(s) appear in the right-hand pane of the Map Viewer.
Following manual deployment via a Network Element object you must manually configure the SNMP
write and read communities and device password through the EM, then commission the object to
discover the chassis and subchassis objects.
For detailed instructions on performing these tasks, see the
“Enabling Communication Between Network
Elements and Devices” section on page 4-22
and the
“Manually Commissioning Network Elements”
section on page 4-25
.
Manually Deploying Using Quickstart
The Quickstart manual deployment method is used when discovery of the entire network is not needed
and the specific IP address and type of device that is connected to the network is known. The Quickstart
option deploys the Network Element, Chassis, and Software objects, then discovers the device and
performs subchassis discovery automatically following deployment in order to determine the contents
of the swtich.
To manually deploy a Catalyst switch using Quickstart, perform the following:
Step 1
Right-click a generic container object and choose Deployment > CSM/7600 Manager, then choose one
of the following options:
•
Quickstart Deploy Catalyst 6000 Chassis
•
Quickstart Deploy Catalyst 6500 Chassis
•
Quickstart Deploy Cisco 2950 Chassis
•
Quickstart Deploy Cisco 2970 Chassis
•
Quickstart Deploy Cisco 3550 Chassis
•
Quickstart Deploy Cisco 4000 Chassis
•
Quickstart Deploy Cisco 4500 Chassis
Note
The manual chassis deployment options other than Quickstart that are available on the
Deployment > CSM/7600 Manager submenu are described in detail in the
“Manually Deploying
Network Objects” section on page 4-9
.
The Deployment Wizard—Object Parameters window appears.
Step 2
Provide data in the Object Parameter fields as applicable per the following descriptions.
•
Catalyst Switch Name—Name of the Network Element object to be displayed in the Map Viewer
application
