9-37
Cisco Catalyst Switch Manager User Guide
OL-4930-01
Chapter 9 Software Management
QoS Management – Policy Map Configuration Window
Conform Action
•
Conform Action—Action to be taken when Policed traffic conforms to QoS parameters. This
attribute may have one of the following values:
–
Drop—Drops packet
–
Transmit—Transmits packet
–
Set DSCP—Assigns DSCP value to packet before it is transmitted.
–
Set Precedence—Assigns IP Precedence value to packet before it is transmitted.
–
A value of none (0) is returned on read if an explicit policer is not defined for the policy map
class.
•
Set DSCP—DSCP value assigned to packets of conforming ingress traffic before transmitting on
egress interfaces.This value is only relevant and will only be set in the running configuration of the
device if the Policy Conform Action is Set DSCP. A value of 0 is returned on read if an explicit
policer is not defined for the policy map class or the conform action is not Set DSCP.
•
Set IP Precedence—IP Precedence value assigned to packets of conforming ingress traffic before
transmitting on egress interfaces. This value is only relevant and will only be set in the running
configuration of the device if the Policy Conform Action is Set Precedence. A value of 0 is returned
on read if an explicit policer is not defined for the policy map class or the conform action is not Set
Precedence.
Additional Notes Tab
The Additional Notes tab of the QoS Management—Policy Map Configuration window contains the
Notes area which is a text box that allows you to type in additional notes.
