11-29
Cisco Catalyst Switch Manager User Guide
OL-4930-01
Chapter 11 Routing Management
BGP Management Window
Redistribution Tab
The Redistribution tab of the BGP Management dialog consists of a single area, Redistribution Table. In
addition to this area, the following subareas are available:
•
Default Metric
•
Edit Redistribution Table
The Redistribution Table area describes the route redistribution configuration of the BGP routing
process. Routes learned from other interior and exterior routing protocols may be redistributed into the
BGP routing domain.
•
Protocol—Source protocol from which routes are being distributed into BGP.
–
IS-IS
–
EIGRP
–
OSPF
•
AS/Tag—The autonomous system tag identifying the BGP routing domain.
•
IS-IS Routing Level—Indicates IS-IS route level redistribution. This field has the following values:
–
none—For protocols other than IS-IS.
–
level-1—Local area/intra-area dedistribution.
–
level-1-2—Redistribution for both inter and intra-area routing.
–
level-2—Backbone/interarea redistribution (default).
•
Metric—BGP metric used to weigh the redistributed route. If no value is specified for Default Metric
(in the BGP tab), this value defaults to 0.
Default Metric
The Default Metric subarea provides the following information:
•
Default Metric—Default metric used for route redistribution. This metric is used when and explicit
metric is not given during route redistribution process.
Edit Redistribution Table
This area allows changes to be made to the attributes shown in the Redistribution Table. These attributes
are discussed in detail in the
Redistribution Tab
.
•
Protocol—Source protocol from which routes are being distributed. This attribute along with Source
ID uniquely identifies a source of network paths to be redistributed through BGP. There may be, at
most, one redistribution entry for a given source of network path information.
–
isis
–
eigrp
–
ospf
–
static
–
connected
–
static and connected
•
AS/Tag—The autonomous system tag identifying the BGP routing domain.
