8-87
Cisco Catalyst Switch Manager User Guide
OL-4930-01
Chapter 8 Interface and Subinterface Management
ATM/E3 Interface Management Window
Figure 8-23 ATM/E3 Advanced Configuration Window
You can select one chassis, more than one module, more than one port adapter, and more than one
interface at a time from the object list on the left side of the window.
The ATM/E3 Advanced Configuration window contains one area named General.
General:
–
Local Proxy ARP—Indicates the status of local proxy ARP on the selected interface, enabled
or disabled.
Layer 3
The Layer 3 area contains the following information:
•
IP Address—Displays the IP address of the layer 3 interface.
•
Netmask—Subnet mask of the interface IP address. Enabled bits indicate the network addressing
bits in the IP address.
•
Clear IP Address button— After receiving confirmation, will remove the IP address setting for this
interface.
