9-43
Cisco Catalyst Switch Manager User Guide
OL-4930-01
Chapter 9 Software Management
MPLS Management Window
Details Tab
The following areas are available on the Details tab of the MPLS Management window:
•
MPLS
•
VC Table
•
Trouble Shooting
MPLS
This area provides the following information:
•
MPLS Enabled—If true, MPLS is enabled on this switch.
•
Router ID—The displayable route identifier for EoMPLS. This ID is derived from the IP address of
the interface.
•
Local LDP ID—This local label distribution protocol ID for EoMPLS.
•
Enabled—Enables MPLS on the target switch.
•
Disabled—Disables MPLS on the target switch.
VC Table
This table describes the EoMPLS virtual circuit instances and defines the following information:
•
VC ID—The virtual circuit identifier for this instance.
•
Client Interface—Name of the interface associated with the virtual circuit.
•
VC State—Current state of the virtual circuit, either ‘up’ or ‘down’.
•
Local VC Label—If assigned, the local label of the virtual circuit.
•
Remote VC Label—If assigned, the remote label of the virtual circuit.
•
Tunnel Label—The label of the tunnel associated with the virtual circuit.
