Cisco Unified Communications Manager, Configuration Manual

Page: 28 / 182

1-8
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
OL-21851-01
Chapter 1 Configuring Cisco Unified Communications Manager for the Cisco TelePresence System
Configuring a Cisco TelePresence Device
Protocol Specific Information
To configure protocol-specific information, enter information into the fields using the information in
Table 1-2 as a guide. Click Save to save your settings.
Check-Boxes
Use Device Pool Calling
Party Transformation CSS — Box is checked.
Retry Video Call as Audio — Box is checked.
Ignore Presentation
Indicators — Box is un-checked.
Allow Control of Device
from CTI — Box is checked.
Logged Into Hunt Group — Box is checked.
Remote Device — Box is un-checked.
Note
When you are finished making changes, click Save to save your settings.
Table 1-1 Device Information Window (continued)
Field Required? Setting
Table 1-2 Cisco TelePresence Protocol-Specific Information
Field Required? Setting
Packet Capture Mode Yes <None>
Packet Capture Duration — 0
Presence Group Yes Standard Presence Group
SIP Dial Rules — <None>
MTP Preferred Originating
Codec Yes 711ulaw
Device Security Profile Yes Cisco TelePresence - Standard SIP Non-Secure Profile (default)
Note For more information about configuring Cisco Unified CM security
features, refer to the
Cisco Unified Communications Manager
Security Guide, Release 7.1(2) .
Rerouting Calling Search Space — <None>
Note
Information in this field reflects Calling Search Spaces that have been
created on this Cisco Unified CM.
SUBSCRIBE Calling Search
Space — <None>
Note Information in this field reflects Calling Search Spaces that have been
created on this Cisco Unified CM.
SIP Profile Yes Standard SIP Profile.
Note Information in this field reflects SIP profiles that have been created
on this Cisco Unified CM.
Digest User — <None>