iii
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
OL-21851-01
Preface
Contents
Note
This feature is only active if the enterprise configuration file on the Cisco Unified Communications
Manager TFTP server is configured. If there is no TFTP configuration file present on the system,
conference control uses the
Internet model (free path)
.
This feature cannot be configured while in an active Cisco TelePresence call.
See
Chapter 2, “Configuring the Cisco Unified IP Phone for MIDlets,”
for more information about
configuring the TFTP server. See also the
“Conference Control Protocol (CCP) VPN Security Solution”
section on page 6
.
OBPT Cisco TelePresence WebEx OneTouch Interoperability
The Cisco TelePresence WebEx OneTouch bridging feature integrates the Cisco WebEx conferencing
server with Cisco Telepresence multipoint meetings. Cisco Telepresence callers use
One-Button-to-Push
(OBTP) technology to connect to meetings. To begin using Cisco TelePresence
WebEx OneTouch on your Cisco TelePresence System (CTS), you must configure the following in
Cisco Unified CM:
•
Configure the SIP trunk for routing Cisco WebEx audio calls from the SIP to the CTMS.
•
Add a route pattern for the Cisco WebEx OneTouch audio number and point it to the
Cisco TelePresence Multipoint Switch (CTMS) SIP trunk.
•
Manage the TFTP profile for the Cisco TelePresence endpoint.
•
Ensure that TFTP profile has the meeting room name configured.
For information about configuring the Cisco WebEx OneTouch solution, see the
Cisco TelePresence
WebEx OneTouch for Cisco TelePresence Configuration Guide
.
Self View Control
The Self View feature allows you to view how you will be seen by others in a Cisco TelePresence
meeting before the meeting begins. By touching the Self View softkey on your CTS Cisco Unified IP
phone while the CTS is idle, you can see a mirror image of your room for a specified amount of time, as
configured in the “Maximum Self View Time (in seconds)” field in the
Product Specific Configuration
Layout
fields for your system in the Cisco Unified CM Administration interface. See the
“Self View
Control” section on page 5
for more information about this feature.
Related Feature Documentation
For a complete list of supported CTS and Cisco Unified CM features, see the following documentation:
•
Cisco TelePresence System Software Feature Guide
on Cisco.com.
•
Cisco TelePresence Administration Software Release Notes
for your release on Cisco.com.
