1-15
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
OL-21851-01
Chapter 1 Configuring Cisco Unified Communications Manager for the Cisco TelePresence System
Configuring a Cisco TelePresence Device
Advertise G.722 Codec
Yes
Wideband Codec. Indicates whether Cisco Telepresence endpoints will advertise
the G.722 audio codec to Cisco Unified CM. When enabled, preference is given to
this audio codec.
Choices are:
•
Use System Default (default)—This CTS will defer to the setting specified in
the enterprise parameter, Advertise G.722 Codec
•
Disabled—This CTS will not advertise G.722 to Cisco Unified CM
•
Enabled—This CTS will advertise G.722 to Cisco Unified CM
See the
Configuring Wideband Codec
section of the
Cisco Unified IP Phone 7931G
Administration Guide for Cisco Unified Communications Manager 6.1(3) (SCCP)
for more information about the G.722 codec.
Table Microphone Count
(CTS 1100, CTS 1300)
Yes
Number of microphones that are available. Select a number from the drop-down
menu.
Note
See the “Setting Up the Microphones” section of the
Cisco TelePresence
System 1300 Assembly, First-Time Setup, and Field-Replaceable Unit Guide
for more information.
External SYSLOG Address —
Configures the external syslog address. Allowed values: Syslog address format can
be either:
•
host
or
•
host:port
Host is either a hostname or IP address (up to 60 characters long). Port is a number
between 0 and 65535. Default is 514.
Alternate
Cisco Unified CM for
Directory Lookup
—
Configures the alternate Cisco Unified CM IP address that the CTS should query in
the directory. Maximum length: 64.
Note
Cisco Unified CM Release 7.x and later releases only.
Cisco TelePresence
Recording Server Address
—
Configures the address (IP address or DNS name) of the Cisco TelePresence
Recording Server (CTRS). Maximum length: 64.
Maximum Self View Time
(in seconds)
—
Leave the default setting.
Note
Camera loopback is always in self view or flipped mode.
See the
“Self View Control” section on page 5-5
for information about using the
Self View feature.
Check Boxes
Enable Audio Echo
Cancellation (AEC)
Yes
Check this box to enable audio echo cancellation in the CTS. Default is True.
Enable Call Termination
Ring
Yes
Check this box to enable the a ring tone at the termination of a call. Default is True.
Optional Hardware
Presentation Codec
—
Box is un-checked by default.
Table 1-4
Product Specific Configuration Layout (continued)
Field
Required? Description