2-4
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
OL-21851-01
Chapter 2 Configuring the Cisco Unified IP Phone for MIDlets
Configuring the Cisco Unified IP Phone
Device Information
Enter the settings to configure the Cisco Unified IP Phone 7975 using the information in
Table 2-1
as a
guide.
Note
Assign the same directory number that is assigned to the Cisco TelePresence device to the
Cisco Unified IP Phone 7975.
Table 2-1
Cisco Unified IP Phone 7975 Device Information
Field
Required?
Setting
Registration
—
Read-only. Indicates whether the system is
Registered with Cisco Unified Communications
Manager and lists the registered Cisco Unified CM
address.
IP Address
—
Cisco Unified IP Phone IP Address. Click on the
address to see information for that phone in a new
window.
Active Load ID
—
View-only field showing the status of the active
load.
Note
Available on the Cisco Unified IP Phone but
not available on the CTS.
Device is active
—
A green check mark indicates that the device is
active.
Device is trusted
—
A green check mark indicates that the device is
trusted.
MAC Address
Yes
MAC address for the Cisco Unified IP Phone 7975.
Description
—
Short description of the device.
Device Pool
Yes
Your device pools. Leave field as Default.
Click View Details to open the Device Details
window, which includes the following system
setting information:
•
Device Pool Settings
•
Roaming Sensitive Settings
•
Device Mobility Related Information
•
Incoming Calling Party Settings
Common Device Configuration
—
Your configured devices. Leave field as <None>.
Click Details or View to see the following
information in a new window:
•
Common Device Configuration Information
•
Multilevel Precedence and Preemption
Information