C-1
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
OL-13677-05
A P P E N D I X
C
Product Specific Configuration Layout Help
Revised: October, 2010, OL-13677-05
Contents
Table C-1
contains detailed information about the Product Specific Configuration fields in the
Cisco Unified Communications Manager Administration interface. To access this information from the
administration interface, click the question mark icon (online help) located at the top of the
Product
Specific Configuration Layout
box.
Table C-1
Product Specific Configuration Fields
Field
Required? Default
Description
Disable
Speakerphone
Yes
False
Disable only the speakerphone functionality. Disabling speakerphone
functionality will not affect the headset. You can use lines and speed dials with
headset/handset.
Disable
Speakerphone and
Headset
Yes
False
Disable all speakerphone functions and headset microphone.
Forwarding Delay
Yes
Disabled
Indicates whether the internal switch begins forwarding packets between the
PC port and switched port on your phone when your phone becomes active.
When forwarding delay is set to disabled, the internal switch begins
forwarding packets immediately. When forwarding delay is set to enabled, the
internal switch waits 8 seconds before forwarding packets between the PC port
and the SW port. You should set Forwarding Delay to enabled when you
connect both ports to switches for redundant uplinks or when you daisy chain
phones together.
PC Port
Yes
Enabled
Indicates whether the PC port on the phone is enabled or disabled. The port
labeled “10/100 PC” on the back of the phone connects a PC or workstation to
the phone so they can share a single network connection.
