Cisco Unified Communications Manager Configuration Manual Download Page 111

Page: 111 / 182

6-3

Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System

OL-21851-01

Chapter 6 Setting Up the Room to Use Cisco TelePresence Manager

Configuring Microsoft Messaging Software for Cisco TelePresence Manager

-08.01.10240

-08.01.7176.002

-6.5.6944

-6.5.7226

-6.5.7638

Note

2007 is supported with Web-based Distributed Authoring and Versioning (

WebDAV

) and

Exchange Web Services (

EWS

Note

Microsoft Exchange with Entourage client is not supported.

•

Scheduling Clients—Outlook Versions 2003 SP2, 2007 SP2

•

This release of Cisco TelePresence Manager is designed to work with Microsoft Internet Explorer
version 6.1.3 or later or Firefox 3.

Note

Cisco cannot guarantee correct system behavior using unsupported browsers

•

IBM Domino (Version 7.0.x, 8.0.x, 8.5) (Operating System: Windows Server 2003 Enterprise
Edition SP2)

•

Scheduling Clients supported

–

Outlook Version 2003 SP2, Outlook Version 2007 SP2

–

Lotus Notes versions: 6.5.x, 7.0.x, and 8.0.x

•

MCS-7845-CTS1 can be used as your Cisco Media Convergence Server.

•

When you install Cisco TelePresence Manager, the Cisco Media Convergence Server hard drive is
formatted, and any existing data on the drive is overwritten.

•

Cisco recommends you configure the system using static IP addressing so it will be easy to manage.

•

To use HD Interop, all Cisco TelePresence System endpoints must be running software version 1.6
or later.

Table 6-1

provides guidelines for preconfiguring the network before installing the Cisco TelePresence

Manager.

Note

The system will use either Microsoft or IBM, but not both.

Summary of Contents for Unified Communications Manager























































































































































































Search results

Summary of Contents for Unified Communications Manager

Reviews:

Related manuals for Unified Communications Manager

Brands by name

Popular brands

Cisco Unified Communications Manager, Configuration Manual

Search results

Summary of Contents for Unified Communications Manager

Reviews:

Related manuals for Unified Communications Manager

Brands by name

Popular brands