1-24
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
OL-21851-01
Chapter 1 Configuring Cisco Unified Communications Manager for the Cisco TelePresence System
Configuring a Cisco TelePresence Device
SNMP (v3) Auth. Algorithm
Yes
Authentication algorithm supported by the SNMP user. This field is only used
for SNMP v3. Choose from the following algorithms:
•
MD5
—Message-Digest algorithm 5
•
SHA
—Secure Hash Algorithm
SNMP (v3) Auth. Password
Yes
SNMP administration user authentication password used to gain access to the
SNMP v3 server associated with the Cisco TelePresence system. Default
password is snmppassword.
•
Maximum field length is 32 characters.
•
Minimum field length is 8 characters.
SNMP (v3) Privacy Algorithm
Yes
Privacy algorithm supported by the SNMP user. This field is only used for
SNMP v3. Choose from the following privacy algorithms:
•
DES
—Data Encryption Standard
•
AES
—Advanced Encryption Standard
SNMP (v3) Privacy Password
Yes
SNMP administration privacy password used to gain access via SNMP v3 on
the Cisco TelePresence system. Default password is snmppassword.
•
Maximum field length is 32 characters.
•
Minimum field length is 8 characters.
SNMP System Location
Yes
SNMP System Location associated with this Cisco TelePresence system.
Maximum field length is 64 characters.
Default is Location.
SNMP System Contact
Yes
Name of the SNMP system contact associated with this Cisco TelePresence
system. Maximum field length is 64 characters.
Default is Contact.
SNMP (v2c) Community Read
Only
Yes
SNMP community strings authenticate access to MIB objects and function as
embedded passwords. Read-only gives read access to authorized management
stations to all objects in the MIB except the community strings, but does not
allow write access. This field is only used for SNMP v2c.
Default is readonly.
SNMP (v2c) Community Read
Write
Yes
SNMP community strings authenticate access to MIB objects and function as
embedded passwords. Read-write gives read and write access to authorized
management stations to all objects in the MIB, but does not allow access to
the community strings. This field is only used for SNMP v2c.
Default is readwrite.
Table 1-10
Cisco TelePresence SNMP Configuration Parameters (continued)
Field
Required?
Setting
