1-20
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
OL-21851-01
Chapter 1 Configuring Cisco Unified Communications Manager for the Cisco TelePresence System
Configuring a Cisco TelePresence Device
Secure Shell Information
Figure 1-4
shows the Secure Shell (SSH) Information window.
Figure 1-4
SSH Information Window
Using the information in
Table 1-8
as a guide, provide a username and password for the SSH account
that will be used to access the command line interface (CLI) and the Cisco TelePresence Web
Administration interface. Click Save to save your settings.
Table 1-8
Cisco TelePresence Secure Shell Settings
Field
Required?
Setting
Secure Shell Admin User
Yes
Username for the Secure Shell account. Used for SSH access and to access
the Cisco TelePresence administration interface. Cisco Technical Assistance
Center (TAC) uses secure shell for troubleshooting and debugging. Contact
TAC for further assistance. Default user name is admin.
•
Maximum field length is 64 characters.
•
Minimum field length is 6 characters.
Tip
Usernames and passwords can contain upper and lower case
alphanumeric characters and the underscore and dash characters.
User names cannot start with a - (dash) or _ (underscore) and cannot
use the following names: apache, daemon, nobody, operator, or
shutdown.
Note
Supports CLI Multiple Level Access (MLA).
Secure Shell Admin Password
Yes
Password for the SSH account to be used for SSH access and to access the
Cisco TelePresence Web Administration interface. Default password is cisco.
•
Maximum field length is 64 characters.
•
Minimum field length is 6 characters.
