1-33
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
OL-21851-01
Chapter 1 Configuring Cisco Unified Communications Manager for the Cisco TelePresence System
Assigning a Directory Number to the Cisco TelePresence Device
Step 3
Make sure that the check box at the bottom of the Directory Number Information section is marked as
indicated:
Active: Checked
Step 4
Click Save to save your settings.
Directory Number Settings
The fields described in
Table 1-16
are left unchanged in the Directory Number Settings box:
Table 1-16
Cisco TelePresence Device Directory Number Settings
Field
Required?
Setting
Voice Mail Profile
—
<None>
Calling Search Space
—
<None>
Presence Group
Yes
Leave the default setting.
User Hold MOH Audio
Source
—
<None>
Network Hold MOH Audio
Source
—
<None>
Auto Answer
Yes
Leave the default setting.
Additional drop-down menu choices:
•
Auto Answer Off
Note
Set Auto Answer Off to use the
One Phone Per
Office
feature.
Optionally, you can set Auto Answer Off and
instead configure the
Product Specific
Configuration Layout
“CTS Auto Answer” setting
to have the CTS pick up the call. This may be
desired if you want to use the Cisco Unified IP
Phone speakerphone.
•
Auto Answer with Headset
•
Auto Answer with Speakerphone
Note
To assign a directory number for the shared-line
Cisco Unified IP Phone, select Auto Answer with
Speakerphone. See the
“Assigning a Directory
Number for the Shared-Line Cisco Unified IP
Phone” section on page 1-38
.
Note
If the call is connected as audio only, verify that the
following check-boxes are checked:
—Disable Speakerphone
—Disable Speakerphone and Headset
