1-9
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
OL-21851-01
Chapter 1 Configuring Cisco Unified Communications Manager for the Cisco TelePresence System
Configuring a Cisco TelePresence Device
Certification Authority Proxy Function (CAPF) Information
Note
This option will not be visible unless you have enabled CAPF on the Cisco Unified Communications
Manager service parameter.
The Security Profile contains additional CAPF settings.
Enter settings for CAPF using the information in
Table 1-3
as a guide. Click Save to save your settings.
Check-Boxes
Media Termination point
Required
—
Box is un-checked.
Unattended Port
—
Box is un-checked.
Note
When you are finished making changes, click Save to save your settings.
Table 1-2
Cisco TelePresence Protocol-Specific Information (continued)
Field
Required?
Setting
Table 1-3
Cisco TelePresence CAPF Information
Field
Required?
Setting
Certificate Operation
Yes
No Pending Operation
Authentication Mode
Yes
Leave this field unchanged.
Authentication String
—
Leave this field unchanged.
Key Size (Bits)
Yes
Leave this field unchanged.
Operation Completes By
—
Leave this field unchanged.
Certificate Operation Status
—
<None>
Note
When you are finished making changes, click Save to save your settings.
