1-23
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
OL-21851-01
Chapter 1 Configuring Cisco Unified Communications Manager for the Cisco TelePresence System
Configuring a Cisco TelePresence Device
SNMP Configuration Parameters
Using the information in
Table 1-10
as a guide, provide the required Simple Network Management
Protocol (SNMP) configuration parameters for accessing the SNMP server that is associated with the
Cisco TelePresence device.
Figure 1-5
shows the SNMP Configuration Parameters screen.
Note
See
Appendix A, “MIBs, RFCs, and SNMP Trap Messages for the Cisco TelePresence System”
for more
information about managing your SNMP configuration.
Passwords in SNMP parameter fields can only be 32 characters in length.
Figure 1-5
SNMP Configuration Parameters
Note
All SNMP fields are marked to reflect the applicable SNMP version.
Table 1-10
Cisco TelePresence SNMP Configuration Parameters
Field
Required?
Setting
Enable SNMP
Yes
Enables or disables SNMP on the CTS. SNMP must be enabled for the
Cisco TelePresence system to support SNMP. Options include the following:
•
Disabled (default)
•
Enabled (v3)
•
Enabled (v3/v2)
•
Enabled (v2c)
Note
SNMP username is automatically configured by the system as
“admin.”
SNMP (v3) Security Level
Yes
Level of security supported by the SNMP user. This field is only used for
SNMP v3. Choose from the following security levels:
•
(v3) Authentication, No Privacy
•
(v3) Authentication, Privacy
