1-37
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
OL-21851-01
Chapter 1 Configuring Cisco Unified Communications Manager for the Cisco TelePresence System
Assigning a Directory Number to the Cisco TelePresence Device
Multiple Call/Call Waiting Settings on Device
X
The Multiple Call/Call Waiting settings make it possible to place a meeting on hold, dial a phone
number, and have up to four active calls on one device. This feature is useful for adding phone calls to
a Cisco TelePresence meeting.
The default setting for the maximum number of additional phone calls allowed on the CTS
Cisco Unified IP phone is 4.
Note
Valid range for Maximum Number of calls is 1-46.
To configure multiple call waiting settings on a specific device, follow these steps:
Step 1
Enter configuration settings in the fields provided using the information in
Table 1-22
as a guide.
Step 2
Click Save to save your settings.
Forwarded Call Information Display on Device
X
Leave the following information unchanged in the Forwarded Call Information Display on Device X
Settings box:
•
Caller Name
•
Caller Number
•
Redirected Number
•
Dialed Number
Table 1-22
Cisco TelePresence Device Multiple Call/Call Waiting Settings
Field
Required?
Setting
Maximum Number of Calls
Yes
Up to 4.
Busy Trigger
Yes
2 (Recommended)
Note
Less than or equal to the maximum number of
calls. By default, after two calls are started by
using OneTouch on the phone, a third attempt
at connecting to the IP phone results in a busy
signal.
