2-2
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
OL-21851-01
Chapter 2 Configuring the Cisco Unified IP Phone for MIDlets
Configuring the Cisco Unified IP Phone
Cisco WebEx on the Cisco Unified CM
If you are using Cisco Unified CM firmware release 8.0, Cisco WebEx is not enabled by default; you
must enable Cisco WebEx manually in the External Data Locations Information field. See the
“External
Data Locations Information” section on page 2-8
for more information.
Adding a New Phone with MIDlets Capability
If you are using Cisco Unified CM firmware release 8.0 and wish to enable
MIDlets
features on new
phone installations, you must first enable Cisco WebEx in the Web Access field. See the
“Product
Specific Configuration Layout” section on page 2-11
for more information.
Configuring the Cisco Unified IP Phone
Use the information in this section to perform the following tasks:
•
Adding a New Phone, page 2-2
•
Managing Cisco Unified IP Phones, page 2-3
Note
The Cisco Unified IP Phone is connected to the Cisco TelePresence device with an Ethernet cable. See
the cabling chapters in the Cisco TelePresence Assembly guides for more detailed cabling instructions.
Go to the Cisco Support Pages to find installation documentation for your Cisco TelePresence System:
Support > Cisco TelePresence > Cisco TelePresence System
Adding a New Phone
To add a new phone, follow these steps:
Step 1
Log in to the Cisco Unified CM Administration interface.
Step 2
From the Device drop-down menu, select Phone. The Find and List Phones Page appears.
Step 3
Choose Cisco 7975 from the Phone Type drop-down menu.
Step 4
Click Next. The Phone Configuration window appears.
Step 5
Choose SIP from the Select the Device Protocol drop-down menu.
Step 6
Click Next. The Phone Configuration window is updated with the following configuration fields:
•
Device Information
•
Protocol Specific Information
•
Certification Authority Proxy Function (CAPF) Information
•
Expansion Module Information
•
External Data Locations Information
•
Extension Information
•
MLPP Information
•
Do Not Disturb
•
Secure Shell Information
•
Product Specific Configuration Layout
