C-4
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
OL-13677-05
Appendix C Product Specific Configuration Layout Help
Contents
“More” Soft Key Timer
—
5
Revert the soft keys displayed to the initial set after you touch the more soft
key. The valid range of values for this timer are 5 to 30 -- indicating the number
of seconds before the softkey set reverts. A value of 0 may also be entered to
disable the timer. Maximum length: 2
Auto Call Select
Yes
Enabled
Enables or disables the automatic call focus switching feature. When
“Enabled,” the phone UI will automatically switch focus to certain calls on the
same line if no user interaction has occurred for 10 seconds. If “Disabled”, the
phone UI will not automatically switch call focus. Disabling the Auto Call
Select feature automatically disables the Auto Line Select feature.
Log Server
—
—
Specifies an IP address and port of a remote system where log messages are
sent. Maximum length: 32
Advertise G.722 Codec
Yes
Use
System
Default
Indicates whether Cisco Unified IP Phones will advertise the G.722 codec to
Cisco Unified Communications Manager. Codec negotiation involves two
steps:
1.
The phone must advertise the supported codec(s) to Cisco Unified
Communications Manager (not all endpoints support the same set of
codecs).
2.
When Cisco Unified Communications Manager gets the list of supported
codecs from all phones involved in the call attempt, it chooses a
commonly-supported codec based on various factors, including the region
pair setting.
Valid values specify Use System Default (this phone will defer to the setting
specified in the enterprise parameter, Advertise G.722 Codec), Disabled (this
phone will not advertise G.722 to Cisco Unified Communications Manager) or
Enabled (this phone will advertise G.722 to Cisco Unified Communications
Manager).
Wideband Headset UI
Control
Yes
Enabled
Users can enable or disable Wideband Headset option on phone user interface
(UI).
Wideband Headset
Yes
Enabled
Enables or disables the use of a Wideband Headset on the phone. Used in
conjunction with User Control Wideband Headset.
Peer Firmware
Sharing
Yes
Disabled
PPID. Enables or disables Pee- to-Peer image distribution in order to allow a
single phone in a subnet to retrieve an image firmware file then distribute it to
its peers - thus reducing TFTP bandwidth and providing for a faster firmware
upgrade time.
Cisco Discovery
Protocol (CDP):
Switch Port
Yes
Enabled
Administrators can enable or disable Cisco Discovery Protocol (CDP) on the
switch port.
Warning
CDP should only be disabled on the Network port if this phone is
connected to a non-Cisco switch.
Table C-1
Product Specific Configuration Fields
