1-16
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
OL-21851-01
Chapter 1 Configuring Cisco Unified Communications Manager for the Cisco TelePresence System
Configuring a Cisco TelePresence Device
Optional Hardware
Click the appropriate check boxes if the following optional hardware devices are installed:
•
Presentation Codec
•
A/V Expansion Box
(audio/video extension unit)
•
Auxiliary Control Unit
Note
This parameter must correctly reflect how your system is configured. Any discrepancy will cause the
CTS to function improperly. See the
“Product Specific Configuration Layout” section on page 1-10
to
find the default values for your system.
Some check boxes will not appear for some device types. The CTS 1100 and the CTS 1300 use the
Auxiliary Control Unit by default, for example, so these boxes are automatically checked.
See the
Cisco TelePresence Hardware Options and Upgrade Guide
for more information about installing
and maintaining optional hardware.
Figure 1-2
and
Figure 1-3
show additional features that you can manage from the Product Specific
Configuration Layout window:
•
Auxiliary Control Unit, page 1-18
•
Dial Plan Information, page 1-18
•
Directory Number, page 1-19
•
Global Location, page 1-19
•
Secure Shell Information, page 1-20
•
External CTS Log Destination, page 1-21
•
SNMP Configuration Parameters, page 1-23
•
SNMP Trap Receive Parameters, page 1-25
•
Managing SNMP MIBs and SNMP Traps, page 1-26
A/V Expansion Box
—
Box is un-checked by default.
Auxiliary Control Unit
—
Box is un-checked by default.
Table 1-4
Product Specific Configuration Layout (continued)
Field
Required? Description
