1-39
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
OL-21851-01
Chapter 1 Configuring Cisco Unified Communications Manager for the Cisco TelePresence System
Assigning a Directory Number for the Shared-Line Cisco Unified IP Phone
Directory Number Information
To configure directory number information, follow these steps:
Step 1
Enter the directory number settings for the shared Cisco Unified IP Phone 7975 line using the
information in
Table 1-23
as a guide.
Step 2
Make sure that the following check box at the bottom of the Directory Number Information window
is marked as indicated:
•
Active: Checked
Step 3
Click Save to save your settings.
Directory Number Settings
To configure directory number settings, follow these steps:
Step 1
Select Auto Answer with Speakerphone in the
Auto Answer
drop-down menu. Use default settings for
all other selections. See the
“Directory Number Settings” section on page 1-33
.
Step 2
Click Save to save your settings.
Call Forward and Call Pickup Settings
Leave all fields unchanged. See the
“Call Forward and Call Pickup Settings” section on page 1-34
.
Table 1-23
Shared-Line Directory Number Information
Field
Required?
Setting
Directory Number
Yes
Directory number for the Cisco Unified IP Phone 7975.
Note
The number must match the
Cisco TelePresence directory number assigned
in the
“Assigning a Directory Number to the
Cisco TelePresence Device” section on
page 1-30
.
Route Partition
—
<Any>
Description
Alerting Name
ASCII Alerting Name