5-6
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
OL-21851-01
Chapter 5 Configuring MIDlets-Enabled Features
Conference Control Protocol (CCP) VPN Security Solution
Dismissing Calls
You can dismiss calls while in Self View mode without disrupting the Self View video and active
presentation. When a call is dismissed, you are taken back to the Self View page.
Note
If you have voicemail configured in Cisco Unified CM, the incoming call alert is not issued because the
call goes directly to voicemail.
Concurrent Feature Support
The
Auto Collaborate
feature is supported while you are in Self View mode. You can plug in to the
Auto Collaborate
VGA
cable and see your local content on the projector or data display.
Related Self View Feature Information
See the
Cisco Unified Communications Manager MIDlets Feature Guide for the Cisco TelePresence
System Phone
for more information about the Self View feature.
Conference Control Protocol (CCP) VPN Security Solution
This feature allows an administrative domain that is hosting a Business-to-Business (B2B) conference
to configure its Cisco TelePresence Multipoint Switch (CTMS) using a specific URL structure. This
URL structure allows the
CCP
HTTP traffic of participating CTS
endpoints
to be routed hop by hop
across one or more service provider (SP) HTTP proxies to reach the correct CTMS.
In the CCP
VPN model (fixed path)
solution, the Administrator configures the enterprise by adding a
static (fixed path) configuration file to the Cisco Unified Communications Manager (Cisco Unified
CM). When the CTS joins a CTMS meeting, it attempts to route
CCP
traffic based on this configuration
file. All
CCP
HTTP traffic then attempts to go to the local CTMS. If no local CTMS matches, packet
traffic is routed to the HTTP proxy.
You can verify configuration status by checking the system status messages for your system and by
checking the configuration using command-line interface (CLI) commands. When configuration is
complete, the Meeting Control button is active on the CTS Cisco Unified IP phone.
Note
This feature is only active if the enterprise configuration file on the Cisco Unified Communications
Manager TFTP server is configured. If there is no TFTP configuration file present on the system,
conference control uses the
Internet model (free path)
.
This feature cannot be configured while in an active Cisco TelePresence call.
See the
“Uploading Files to the Cisco Unified CM TFTP Directory” section on page 2-14
for
information about configuring the TFTP enterprise configuration file.
Related CCP VPN Feature Information
For more information, see the following documentation on Cisco.com:
