2-7
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
OL-21851-01
Chapter 2 Configuring the Cisco Unified IP Phone for MIDlets
Configuring the Cisco Unified IP Phone
Protocol Specific Information
Link the Cisco TelePresence device to Cisco Unified Communications Manager phone profiles for the
presence group and security-related SIP phone settings using the information in
Table 2-2
as a guide.
Certification Authority Proxy Function (CAPF) Information
Table 2-3
describes fields found in the Certification Authority Proxy Function (CAPF) Information
section on the Phone Configuration page. Leave all fields unchanged.
Table 2-2
Cisco Unified IP Phone 7975 Protocol-Specific Information
Field
Required?
Setting
Packet Capture Mode
Yes
<None>
Packet Capture Duration
—
0
Presence Group
Yes
Standard Presence group.
SIP Dial Rules
—
<None>
MTP Preferred Originating Codec
Yes
711ulaw
Device Security Profile
Yes
Non Secure SIP Profile auth by null String.
Note
For more information about configuring
Cisco Unified CM security features, refer
to the
Cisco Unified Communications
Manager Security Guide, Release 7.1(2)
.
Rerouting Calling Search Space
—
<None>
SUBSCRIBE Calling Search Space
—
<None>
SIP Profile
Yes
Standard SIP Profile.
Digest User
—
<None>
Check-Boxes
Media Termination point Required
—
Box is un-checked.
Unattended Port
Require DTMF Reception
Note
When you are finished making changes, click Save to save your settings.
Table 2-3
CAPF Settings
Field
Required?
Setting
Certificate Operation
Yes
No Pending Operation.
Authentication Mode
Yes
Leave this field unchanged.
Authentication String
—
Key Size (Bits)
Yes
Operation Completes By
Optional
Certificate Operation Status
—
<None>
Note
Security Profile Contains Additional CAPF Settings. See the
“Phone Security Profile CAPF
Information” section on page 1-29
.
