Samsung S5PC100, Руководство пользователя

Страница: 887 / 1863

USB2.0 HS OTG S5PC100 USER’S MANUAL (REV1.0)
8.10 -44
8.2.21 Host Frame Interval Register (HFIR, R/W, Address = 0xED20_0404)
This register stores the frame interval information for the current speed to which the core has enumerated
HFNUM Bit Description R/W Reset
Value
Reserved [31:16] - 16’h0
FrInt [15:0] Frame Interval
The value that the application programs to this field specifies the
interval between two consecutive SOFs (FS) or micro- SOFs (HS)
or Keep-Alive tokens (HS). This field contains the number of PHY
clocks that constitute the required frame interval. The default
value set in this field for a FS operation if the PHY clock frequency
is 60 MHz. The application can write a value to this register only
after the Port Enable bit of the Host Port Control and Status
register (HPRT.PrtEnaPort) has been set. If no value is
programmed, the core calculates the value based on the PHY
clock specified in the FS/ LS PHY Clock Select field of the Host
Configuration register (HCFG.FSLSPclkSel). Do not change the
value of this field after the initial configuration.
•
125
μ
s * (PHY clock frequency for HS)
•
1 ms * (PHY clock frequency for FS/LS)
R/W 16'h17D7
8.2.22 Host Frame Number/Frame Time Remaining Register (HFNUM, R, Address = 0xED20_0408)
This register indicates the current frame number. It also indicates the time remaining in the current frame.
HFNUM Bit Description R/W Reset Value
FrRem [31:16] Frame Time Remaining
Indicates the amount of time remaining in the current microframe
(HS) or frame (FS/ LS), in terms of PHY clocks. This field
decrements on each PHY clock. If it reaches zero, this field is
reloaded with the value in the Frame Interval register and a new
SOF is transmitted on the USB.
R 16'h0
FrNum [15:0] Frame Number
This field increment if a new SOF is transmitted on the USB, and
is reset to 0 if it reaches 16'h3FFF.
R 16'h0