Oracle X5-4, Руководство по обслуживанию

Страница: 91 / 358

Clear Hardware Fault Messages
Clear Hardware Fault Messages
This section provides instructions for clearing component faults in Oracle ILOM.
After servicing a component, you might need to manually clear the fault using Oracle ILOM.
Faults are captured by Oracle ILOM's fault manager and stored in the fault management
database. If a component fault needs to be manually cleared, use the fmadm command from the
Oracle ILOM Fault Management shell. The Fault Management shell is accessible by logging
in to the Oracle ILOM CLI. For events logged in the Oracle ILOM event log, use the Oracle
ILOM web interface.
For information about using fmadm, refer to the Oracle ILOM User Guide at
http://www.
oracle.com/goto/ILOM/docs
Before You Begin
This procedure requires the use of the Oracle ILOM CLI interface.
1. Open an SSH session and at the command line log in to the SP Oracle ILOM CLI.
Log in as a user with root or administrator privileges. For example:
ssh root@
ipadress
where ipadress is the IP address of the server SP.
For more information on accessing Oracle ILOM, refer to the Oracle X5 Series Servers
Administration Guide at
http://www.oracle.com/goto/x86AdminDiag/docs
.
The Oracle ILOM CLI prompt appears:
->
2. To access fmadm, type:
start /SP/faultmgmt/shell
The fmadm prompt appears:
faultmgmtsp>
3.
To get a listing of command options for displaying or clearing a fault with
fmadm, type:
help fmadm
The following output appears:
Usage: fmadm <subcommand>
where <subcommand> is one of the following:
faulty [-asv] [-u <uuid>] : display list of faults
Servicing the Server 91