manualshive.com logo in svg

Oracle X5-4, Руководство по обслуживанию

Поделиться
Скачать
Oracle X5-4 Скачать руководство пользователя страница 110

Manage the Locator Indicator Locally

The Locator indicator on the Summary screen changes to indicate the status of the Locator

indicator.

See Also

■

Oracle Integrated Lights Out Manager 3.2.x Documentation Library at: 

http://www.

oracle.com/goto/ILOM/docs

Manage the Locator Indicator Locally

Once you have identified the server by its blinking Locator indicator, use this procedure to turn

off the Locator indicator.

Before You Begin

■

You must be physically present at the server.

■

For button and indicator location information, see 

“Server Front Panel

Features” on page 17

.

To manage the Locator indicator locally, do one of the following:

■

To turn the Locator indicator off, press the Locator indicator button.

■

To turn on the Locator indicator, press the Locator indicator button.

Note - 

Some Oracle ILOM security procedures require that you turn on the Locator indicator

locally, as part of a physical presence verification step.

■

To perform a lamp test of all front panel indicator LEDs, press the Locator

indicator three times within a five-second period.

All of the front panel LEDs light up and remain lit for 15-20 seconds.

See Also

■

Oracle Integrated Lights Out Manager 3.2.x Documentation Library at: 

http://www.

oracle.com/goto/ILOM/docs

Remove the Server Cover

This section provides instructions for removing the server cover.

The server cover has an interlock switch which is a safety mechanism that prevents power from

being applied to the server when the cover is off. The switch prevents accidental contact with

110

Oracle Server X5-4 Service Manual • December 2015

Содержание X5-4







































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды