Oracle X5-4, Руководство по обслуживанию

Страница: 81 / 358

Tools and Equipment
■
Anti-static bag used to wrap a replacement part
■
ESD mat (orderable from Oracle)
■
A disposable ESD mat (shipped with some optional system components)
Tools and Equipment
To service the system, you need the following tools:
■
No. 2 Phillips screwdriver
■
Anti-static wrist strap
■
ESD mat and grounding strap
You might also need a system console device, such as one of the following:
■
PC or workstation with RS-232 serial port
■
ASCII terminal
■
Terminal server
■
Patch panel connected to a terminal server
Component Filler Panels
Your server might be shipped with module-replacement filler panels for CPUs, storage drives
(HDD or SSD), the DVD drive, and the PCIe cards. A filler panel is an empty metal or plastic
enclosure that does not contain any functioning system hardware or cable connectors.
The filler panels are installed at the factory and must remain in the server until you replace them
with components. This seals system and provides noise, EMI, and airflow containment. If you
remove a filler panel and continue to operate your system with an empty module slot, the server
might overheat due to improper airflow. For instructions on removing or installing a filler panel
for a server component, refer to the section in this guide about servicing that component.
The following illustration shows the storage drives and storage drive filler panels installed in
the server.
Servicing the Server 81