Omron CJ1W-MA - REV 10-2008, Руководство по эксплуатации

Страница: 602 / 644

575
List of Error Codes Appendix D
List of G-series Warning Displays
Note (1) All warnings are retained. After resolving the problem, clear the alarms and the warnings.
(2) When multiple warnings occur, the warning codes are displayed on the front panel in the order of
their priority (shown above). The value read from the network is set.
Priority Servo Drive
display
PCU error
code
Warning detection
function
Warning details
A.94 4094 Data setting warn-
ing • Command argument setting is out of the range.
• Parameter write failure.
• Command settings are wrong, and others.
A.95 4095 Command warning • Command output conditions are not satisfied.
• Received unsupported command.
• Subcommand output conditions are not satisfied.
A.96 4096 ML-II communica-
tions warning One or more MECHATROLINK-II communications error
occurred.
A.90 4090 Overload warning 85% of the overload alarm trigger level has been exceeded.
A.91 4091 Regeneration over-
load warning 85% of the regeneration overload alarm trigger level has
been exceeded.
A.92 4092 Battery warning Voltage of absolute encoder battery has dropped below
3.2 V.
A.93 4093 Fan lock warning The built-in cooling fan stopped, or rotated abnormally.
High
Low