Omron CJ1W-MA - REV 10-2008, Руководство по эксплуатации

Страница: 120 / 644

93
Common Parameter Area Section 4-3
4-3-2 Common Parameter Details
The data set in the Common Parameter Area is as follows:
Data Details Axis Operating Output Memory Area Designation
Specifies the words allocated for the Axis Operating Output Memory Areas.
0000 hex: No setting (default setting)
00B0 hex: CIO Area
00B1 hex: Work Area
00B2 hex: Holding Area
00B3 hex: Auxiliary Area
0082 hex: DM Area
0050 to 0059, 005A, 005B, 005C hex:
EM Area (005
@
hex:
@
= EM Bank No.)
Beginning Word of Axis Operating Output Memory Areas
Specifies the beginning word of the Axis Operating Output Memory Areas.
The Axis Operating Output Memory Area designation and the word deter-
mined using this parameter are used as the beginning word of the Operat-
ing Output Memory Area for Axis 1. Each axis is allocated 25 words in
sequence up to the highest axis number registered in the scan list.
1857 hex 00 (fixed) 07 to 04 03 to 00 C2 master connection:
0: No C2 master (default setting)
1: C2 master connected
Number of communications retries:
Set value: 0 to 7, F
The default setting 0 is the same as when the number of
retries is set to 1.
C2 mas-
ter con-
nection Number
of com-
munica-
tions
retries
PCU's
address
Contents Setting
Bits 08 to 15 Bits 00 to 07
Unit address Name Enable timing
1838 hex Axis Operating Output Memory Area designa-
tion At powerup or
restart.
1839 hex Beginning word of Axis Operating Output Mem-
ory Areas
183A hex Axis Operating Input Memory Area designation
183B hex Beginning word of Axis Operating Input Memory
Areas
Data con-
figuration 15 08 07 00 Data setting range Default
1838 hex 00B0 to 00B3, 0082,
0050 to 005C hex 0000
1839 hex 0000 to 7FFF hex 0000
183A hex 00B0 to 00B3, 0082,
0050 to 005C hex 0000
183B hex 0000 to 7FFF hex 0000
Axis Operating Output Memory Area designation
Beginning word of Axis Operating Output Memory
Areas
Axis Operating Input Memory Area designation
Beginning word of Axis Operating Input Memory
Areas