Medtronic PROTECTA XT DR D314DRG, Руководство для клиницистов

Страница: 80 / 508

4.9.4 How to view the rationale for TherapyGuide suggestions
1. On the Parameters screen, select [TherapyGuide…] to open the TherapyGuide
window.
2. Select [Rationale…] to open the Rationale window.
3. Select [Close] twice to return to the Parameters screen.
4.10 Viewing and entering patient information
Devices can store patient-related information that you can view and print during a patient
session. This information is typically programmed into the device at the time of implant, but
it can be revised at any time.
When you enter the patient’s clinical conditions (Date of Birth and History) and program
them into device memory, they are available to the TherapyGuide feature. Likewise, this
same information programmed through the TherapyGuide feature displays in the Patient
Information screen. For more information, see Section 4.9, “Using TherapyGuide to select
parameter values”, page 76.
The patient’s name and ID and the device serial number are printed on all full-size and strip
chart reports. If the programmer is using wireless telemetry, the patient is also identified at
the bottom of the programmer screen, either by the patient’s name or by the patient ID (if
the patient’s name was not entered).
Note: The Patient Information screen should not be used in the place of the patient’s medical
chart (refer to Section 1.1.6, “Notice”, page 18 in the Introduction).
If you enter text that does not fit in the parameter display area, the entry is shortened. The
full entry is visible on the Patient Information Report. When displayed or printed from other
screens, the text entry may be shortened.
Medtronic PROTECTA™ XT DR D314DRG
80 Clinician Manual