Medtronic PROTECTA XT DR D314DRG Скачать руководство пользователя страница 11

Страница: 11 / 508

1.1.2 Product literature

Before implanting the device, it is strongly recommended that you take the following actions:

●

Read the product literature provided for information about prescribing, implanting, and

using the device, and for conducting a patient follow-up session.

●

Thoroughly read the technical manuals for the leads used with the device. Also read

the technical manuals for other system components.

●

Discuss the device and implant procedure with the patient and any other interested

parties, and provide them with any patient information materials packaged with the

device.

1.1.3 Technical support

Medtronic employs highly trained representatives and engineers located throughout the

world to serve you and, upon request, to provide training to qualified hospital personnel in

the use of Medtronic products.
In addition, Medtronic maintains a professional staff of consultants to provide technical

consultation to product users.
For more information, contact your local Medtronic representative, or call or write Medtronic

at the appropriate address or telephone number listed on the back cover.

1.1.4 Customer education

Medtronic invites physicians to attend an educational seminar on the device. The course

describes indications for use, system functions, implant procedures, and patient

management.

1.1.5 Explanation of symbols

The following list of symbols and abbreviations applies to various products. Refer to the

package labels to see which of these apply to this product.

Medtronic

PROTECTA™ XT DR D314DRG

Clinician Manual

Содержание PROTECTA XT DR D314DRG





























































































































































































































































































































































































































































































































Результаты поиска

Содержание PROTECTA XT DR D314DRG

Отзывы:

Бренды по названию

Популярные бренды

Medtronic PROTECTA XT DR D314DRG, Руководство для клиницистов

Результаты поиска

Содержание PROTECTA XT DR D314DRG

Отзывы:

Бренды по названию

Популярные бренды