JBT FoodTech Frigoscandia GYRoCOMPACT M7, Руководство по установке

Страница: 23 / 288

13
SAFETY
0000-00-01GB-13-06
ELECTRICAL SYSTEM
Work on the electrical system may only be carried out by au-
thorized personnel and must be undertaken in accordance with
current laws and regulations.
DANGER!
A current of 100 mA, passing through the hu-
man body, can be fatal. This can occur at low
voltages as well. Before carrying out any poten-
tially dangerous work on equipment it must be
made electrically safe.
• Always observe both the safety regulations and instructions
applying to the work site and those stated in the manual.
• Always switch off the main power supply before starting any
work on the equipment.
• Assume at all times that POWER is “ON” and treat all con -
ditions as live. This practice assures a cautious approach
which may prevent an accident or injury.
• To remove power from a circuit or equipment, open the
switch or breaker and lock in the open position.
• Make certain that the circuit is OPEN by using the proper
test equipment.
Note!
Test equipment must be checked at regular intervals.
• Capacitors must be given time to discharge, otherwise it
should be done manually with care.
• There may be circumstances where trouble-shooting on live
equipment may be required. Under such conditions a risk
assessment must be carried out and special precautions
must be taken as follows:
a) Make certain your tools and body are clear of power
sources.
b) Extra safety measures should be taken in damp areas.
c) Be alert and avoid any outside distractions.
• Before applying power to any equipment, make certain that
all personnel are clear of the machine.
• Electrical cabinet doors should only be opened when
checking the electrical equipment or wiring. After clos-
ing the cabinet doors, make certain that (on those panels
where applicable) the switch or breaker handle mechanism
is operating properly.
• All covers on junction panels should be closed before leav -
ing any job.
• Insulated tools must be used at all times when working on
electrical systems.