JBT FoodTech Frigoscandia GYRoCOMPACT M7, Руководство по установке

Страница: 158 / 288

SERVICE INFORMATION
SERVICE INFO NUMBER:
342
EQUIPMENT:
GENERAL GC FRIGoDRIVE
REVISED BY:
GÖRAN GRAMBY
REVISION DATE:
APRIL, 2014
2
342-01GB-00
Incorrect transfer
Here the distance between the rails increase after the transfer
point. There will be 2 transfer points, one at the stand and one
later when the distance between the rails go down to the link
height measure again. This will give excessive vertical forces on
the sidelinks that can give permanent damage to chains and to
the belt.
Rail 3
Rail 2
Lh+2
Lh
Lh
Rail 1
“Goose neck“
Incoming rail
Outgoing rail Horse shoe rail
Picture 2. Incorrect transfer (Dual transfer)
How to achieve correct transfer
Rail 1 and infeed rail
First ensure that all stands and connecting rails are level and in
position.
1. Level the incoming rail connecting to rail 1.
2. Level rail 2 connecting to rail 1.
3. Arrange three pieces of square tubes (Transfer Rail Tool)
according to the picture below. Attach two of the square
tubes to the underside of rails with clamps.
Picture 3. Position of the three square tubes