JBT FoodTech Frigoscandia GYRoCOMPACT M7, Руководство по установке

Страница: 219 / 288

DOCUMENT NUMBER: 307-01GB-00 PAGE: 9/10
EQUIPMENT: GENERAL
SERVICE INFO NUMBER: 307
REVISION DATE: APRIL, 2009
REVISED BY: JOHNY SORÄNG
SERVICE INFORMATION
13 Smart Logic
14 Special Functions
15 Drive Information
16 Data Readouts
17 Motor Feedb. Option
After selecting a parameter group, choose a
parameter by means of the navigation keys. The
middle section on the display shows the param-
eter number and name as well as the selected
parameter value.
Changing Data
•
Press OK toselect parameter.
• Use the navigation buttons to change the
values of the parameter.
•
Press OK to confirm change.
9. Parameters to Change?
In order for the frequency converter to function
properly for a specific equipment, settings and
parameter must be adjusted. All settings can be
found in the electrical drawings for each specific
equipment. Always have the drawings close by
when programing the frequency converter.
Note!
Make sure you have full access to change the
frequency converter by checking parameter
0-61. Change to Full Access [0] if needed. If the
frequency converter is locked, use the pass-
word to unlock. The password is 100.
~~~