JBT FoodTech Frigoscandia GYRoCOMPACT M7, Руководство по установке

Страница: 217 / 288

DOCUMENT NUMBER: 307-01GB-00 PAGE: 7/10
EQUIPMENT: GENERAL
SERVICE INFO NUMBER: 307
REVISION DATE: APRIL, 2009
REVISED BY: JOHNY SORÄNG
SERVICE INFORMATION
Select Quick Setup to go through a limited amount of param-
eters to get the motor running almost optimally. The default
setting for the other parameters considers the desired control
functions and the configuration of signal inputs/outputs (control
terminals).
The selection of parameter is effected by means of the arrow
keys. The parameters in the following table are accessible.
Parameter: Setting:
Par. 0-01 Language
Par. 1-20 Motor Power [kW]
Par. 1-22 Motor Voltage [V]
Par. 1-23 Motor Frequency [Hz]
Par. 1-24 Motor Current [A]
Par. 1-25 Motor Nominal Speed [rpm]
Par. 5-12 Terminal 27 Digital Input [0] No function
Par. 1-29 Automatic Motor Adaptation [1] Enable complete
AMA
Par. 3-02 Minimum Reference [rpm]
Par. 3-03 Maximum Reference [rpm]
Par. 3-41 Ramp 1 Ramp up Time [sec]
Par. 3-42 Ramp 1 Ramp Down Time [sec]
Par. 3-13 Reference Site
Select Changes made to get information about:
•
the last 10 changes. Use the up/down navigation keys to
scroll between the last 10 changed parameters.
•
the changes made since default setting.
Select Loggings to get information about the display line read-
outs. The information is shown as graphs.
Only display parameters selected in par. 0-20 and par. 0-24 can
be viewed. It is possible to store up to 120 samples in the
memory for later reference.