JBT FoodTech Frigoscandia GYRoCOMPACT M7, Руководство по установке

Страница: 12 / 288

6
0000-00-01GB-11-24
SAFETY
components. The system is designed to protect the operator
and other personnel during operation.
Alarm
Never disregard an alarm, it could cause personal injury or
damage to the equipment. Always check and remedy the cause
of an alarm before restarting the equipment.
Emergency stop
These are located on and around at the equipment and are
clearly marked.
Make sure that everybody that works with the equipment knows
where the emergency stops are located and how to reset them,
see “Operation, Emergency stop”.
DANGER!
During maintenance and service work the
personal safety system may be disabled. Always
make sure to secure the area around the equip-
ment with Lock-out/Tag-out signs and devices
when the personal safety system is disabled to
ensure safety and minimize the risk of danger.
Warning symbols
Note!
Symbols are applicable depending on installed equipment.
Low temperature
Wear required, protective clothing when working at low temper -
atures or with cold components.
High temperature
The equipment incorporates a high temperature hazard. Wear
required, protective clothing when working at high temperatures
or with hot components and hot liquids to prevent burn injuries.
Moving parts
The equipment contains moving parts. Never undertake any
kind of work on parts that are moving.
Watch your fingers and do not have any loose hanging clothing,
jewellery or unbound long hair, which may be caught in moving
parts and cause personal injury or damage the equipment.
Thermofluid oil system
The oil in the thermofluid system is the warmest part of the
equipment. Make sure all pipes are insulated or out of reach.
The oil in this system shall be foodgrade type.
Risk of slipping
The floors in and around the equipment can be very slippery
due to water, frost, oil, product residues or other spills.