JBT FoodTech Frigoscandia GYRoCOMPACT M7, Руководство по установке

Страница: 11 / 288

5
SAFETY
0000-00-01GB-11-24
Hygiene/cleaning
In order to attain optimum results and avoid bacterial growth,
only use detergents and disinfectants that are suitable for the
materials listed for the equipment. See chapter “Operation, Ma -
terial in equipment”
1)
. Incorrect or careless cleaning or disinfec-
tion can cause personal injury.
Observe local regulations regarding clothing, hair covers, wear
-
ing of jewellery etc.
Maintenance
Maintenance work shall be carried out by authorized and trained
personnel only. Always perform a risk assessment before car-
ing out any maintenance work. E.g. any test run required with
removed guards shall be carried out with great care to avoid
injuries. Always observe the maintenance intervals recommend -
ed in the manual. For access to equipment components that
require maintenance or service, use only tools for this purpose
i.e. platforms, ladders and so on. Never walk, stand or climb
any parts of the equipment that is not designed for this purpose.
Part may not be able to sustain the load, resulting in injury to
personnel or damage to equipment.
Lighting
JBT recommends working illuminations of approximately 200
lux around the equipment. Good lighting facilitates checks and
work on the equipment while also lowering the risk of accidents.
JBT only fit shatterproof tubes and high temperature incandes -
cent bulbs in all internal light fittings. For reliability and safety
reasons, only use replacement tubes and bulbs listed in the
spare parts list.
2)
Incorrect lighting can lead to injury to people or damage to the
equipment.
Hydraulics / pneumatics (if fitted)
Work on the hydraulic/pneumatic system may be done only by
trained personnel. Always ensure that the system is depressu-
rized before starting work.
Follow the manufacturer’s directions with regard to service.
Pressure vessel
Work on pressure vessel connections may be done only by
qualified personnel. Always ensure that the system is depres -
surized before starting work. Pressure testing must always be
performed after finishing work.
Personal safety system
All JBT equipment have a safety system installed. The personal
safety system is integrated in both electrical and mechanical
2)
Internal lightning is not fitted on all equipment.
1)
This chapter may not be included in all manuals.