JBT FoodTech Frigoscandia GYRoCOMPACT M7, Руководство по установке

Страница: 225 / 288

5
039-01GB-03
SERVICE INFORMATION
Filter type F68H
The filter element can not be cleaned. It should be exchanged if
choked, red filter indicator.
Re–assembly
Make sure that the gaskets are not damaged at re–assembly. Ap-
ply silicon grease on the gaskets.
Tighten the bowl so that the
∆
-mark lies between the ] [ –marks.
Automatic drain system
The automatic drain mechanism is located in the lower section
of the filter. The strainer should be cleaned with compressed air
if choked.
Re–assembly
The O–ring between the intermediate section and the top sec-
tion should be exchanged at reassembly.
Hand tighten the intermediate body.
Make sure that all other gaskets are not damaged at re–assem-
bly. Apply silicon grease on the gaskets.
Note!
The sight glass can be positioned anywhere within one revolu-
tion from the fully tightened position.
ill 4a: Oil and liquid water filter type F68H.
Filter element
Intermediate
body
Filter indicator
ill 3a: Oil and liquid water filter type F74C.
Filter element
Intermediate
body
Filter indicator