1
1000-07-01GB-16-01
INSTALLATION
INSTALLATION MANUAL
INSTALLATION OF THE
OUTFEED UNIT
All the information that is needed to install the
outfeed unit can be found in the drawings of the
unit. Follow the drawings and the applicable
instructions about safety and the handling of the
equipment, that you find in this manual, to install
the outfeed unit.
Outfeed drive adjustment, GC
with fixed outfeed drive
Outfeed motor pulling force
1. Disconnect the outfeed motor.
2. Run belt tension tests at low, medium and
high belt speeds.
3. Connect outfeed motor.
4. Adjust the chain tensioner so that you get a
clearance
according to illustration 1.
5. Check the motors pulling force by pressing
a blunt object against the chain.
Refer to
illustration 1.
Do this running the belt drive
system at low, medium and high speed.
6. Adjust the sprocket combination to
obtain a good chain tension at the different
speeds.
Refer to table 1 in this document.
If
the chain tension varies much at
different speeds, adjust the chain tension at
the customer’s normal operating speed.
7. Run a belt tension test using a logger. The
belt tension must be at least the belt tension
that was measured without the outfeed drive
+ 50 N.
Factors that may increase the belt tension
needed at the outfeed:
•
Products that sticks to the belt.
•
Wide belts.
•
Heavy belts.
•
High stack.
•
Long outfeed rail.
•
High product weight/ meter.
30-40 N
~10 mm
10-20 mm
4
6
1. The outfeed unit
Содержание FoodTech Frigoscandia GYRoCOMPACT M7
