Fuji Electric Frenic lift, Справочное руководство

Страница: 102 / 254

2.3 Overview of Function Code
C
hap.
2
FUN
CT
IO
N
C
O
D
E
S

System-specific initialization (H03 = 2, 3)
Initializes data of the specified function codes to the values required for the system as listed below
Data of function code shown as "-" or not listed below will be initialized to the factory defaults.
Target function code
Initialized to:
H03 = 2 H03=3
F03 Rated Speed 60.00 r/min -
F04 Base Speed 60.00 r/min -
F20 DC Braking (Starting Speed) - 6.00 r/min
F21 DC Braking (Braking Level) - 50 %
F22 DC Braking (Braking Time) - 1.00 s
F23 Starting Speed - 15.00 r/min
F25 Stop Speed 0.20 r/min 6.00 r/min
F42 Control Mode 1 2
E30 Speed Arrival (FAR) (Hysteresis) 0.60 r/min -
E31 Speed Detection (FDT) (Detection level) 60.00 r/min -
E32 Speed Detection (FDT) (Hysteresis) 0.60 r/min -
E36 Speed Detection 2 (FDT2) (Detection level) 60.00 r/min -
C03 Battery Operation speed 2.00 r/min -
C06 Maintenance Speed 20.00 r/min -
C07 Creep Speed 3.00 r/min -
C11 High Speed 1 60.00 r/min -
C20 Jogging Operation Speed 30.00 r/min -
P01 Motor (No. of poles) 20 -
P06 Motor (No-load current) 0.00 A -
P07 Motor (%R1) 5.00 % -
H67 Stop Speed (Holding time) - 0.00 s
H74 Speed Agreement (Hysteresis) 0.40 r/min -
L01 Pulse Encoder (Selection) 5 -
L02 Pulse Encoder (Resolution) 2048 P/R -
L36 ASR (P constant at high speed) 2.5 -
L38 ASR (P constant at low speed) 2.5 -
L40 ASR (Switching speed 1) 6.00 r/min -
L41 ASR (Switching speed 2) 12.00 r/min -
L65 Unbalanced Load Compensation (Operation) - 0
L68 Unbalanced Load Compensation (ASR P constant) 2.5 -
L69 Unbalanced Load Compensation (ASR I constant) 0.005 s 0.010 s
L73 Unbalanced Load Compensation (APR P constant) 1.00 -
L83 Brake Control (OFF delay time) - 0.00 s
L87 Door Control (Door open starting speed) 50.00 r/min -
2-89