Fuji Electric Frenic lift, Справочное руководство

Страница: 235 / 254

3.4.3.2 Checking function code data: “Data Check”
PRG > 2 > 2
Function codes and function code data can be checked at the same time. Also, function codes that have
been changed from their factory default values are indicate by an asterisk (*). Selecting the function
code and pressing key allows you to edit or change the displayed function code data.
The Screen transition in this screen is almost same as in 3.4.3.1. However, the function code list screen
is as shown below.
Figure 3.9 Checking function code data (display example)
3.4.3.3 Checking changed function code data: Changed Data”
PRG > 2 > 3
Only function codes that have been changed from their factory default values are shown. Selecting the
function code and pressing key allows you to refer to or change the displayed function code data.
Figure 3.10 Checking changed function code data (display example)
REM
Changed Data
PRG>2>3
S.Spd 1450
r/min
1800.00r/min
1.00s
03
24
2.00r/min 25
117:STBY 07
F:Fundamental
E:Extension
“Changed” marker
Function code data
REM
Data Check
PRG
PRG>2>2
S.Spd 1450
r/min
0:CHG OK
0:Multi
00
01
1800.00r/min
1500.00r/min
03
04
380V 05
F:Fundamental
*
Function code number
3-14